When an optician asks whether you want “single vision or progressive”, most people nod and hope for the best. It helps to know what is actually being offered. A lens design is simply the map of power across the lens. Some lenses hold one power everywhere; others change power from top to bottom, so that a road sign and a phone screen can both be sharp through one pair.
Here is how each design works, who it suits, and why the fitting matters as much as the lens itself.
Single vision: one power, the whole lens
A single vision lens has the same prescription at every point. It is the simplest design and still the most common one. It corrects distance or near vision, or it is made as a dedicated reading or computer pair.
Because the power is uniform, there is nothing to adapt to beyond the new prescription itself. The main choice is between a conventional spherical surface and an aspheric one. Aspheric surfaces flatten towards the edge, which makes the lens thinner, reduces the magnified look of strong plus lenses and the shrunken look of strong minus lenses, and keeps the image sharper when you look through the edge of the lens rather than the centre. (How thick a lens ends up also depends on the material; see our guide to lens materials and refractive index.)
Single vision suits almost everyone under about forty, and many older wearers who prefer separate driving and reading pairs to one compromise lens.
Bifocal: two zones with a visible line
A bifocal carries the distance prescription in the main lens and a reading segment, usually a D-shaped window, set into the lower part. The line between the two is visible and the jump in power is abrupt. Look at the floor through the segment and the image jumps.
Bifocals have lost ground to progressives but are not obsolete: the reading area is wide and undistorted, the price is lower, and some wearers who never settled into a progressive find a bifocal effortless. The missing piece is the intermediate distance: a computer screen at arm’s length sits between the two zones and can be sharp through neither.
Progressive: a smooth change from distance to near
A progressive lens changes power gradually down the lens with no visible line. The top gives distance, the middle intermediate, the lower part the full reading addition. The channel through which this change happens is called the corridor.
There is a cost, and it is set by physics rather than by the manufacturer. When power changes smoothly along a surface, unwanted astigmatism appears either side of the corridor. This is the soft blur you notice in the lower left and lower right of every progressive lens. Premium designs push it further out or spread it more gently; none removes it.
Getting used to them
Most first-time wearers settle in within days; a minority need two weeks. The trick is to point your nose at what you want to see and let the eyes drop into the reading zone, rather than sweeping sideways through the blurred edges. Full-time wear from day one speeds this up. The slight dizziness some people feel at first comes from that side blur sweeping across the view as the head turns, and the brain normally learns to ignore it.
Why the fitting matters
A progressive is only as good as its position in front of your eyes. The optician measures your pupillary distance for each eye, the fitting height from the lens bottom to your pupil centre, and ideally the tilt and wrap of the frame on your face. A lens fitted two millimetres too high puts the intermediate zone where distance should be.
Corridor length and frame size
The corridor has to fit inside the frame. Designs come in corridor lengths from roughly 11 mm to 18 mm, and the frame needs enough depth below the pupil to contain the chosen corridor plus the reading zone; most designs need somewhere around 14 to 18 mm from the pupil centre to the bottom of the lens. Very shallow frames force a short corridor, which compresses the change in power and narrows the intermediate zone. Slim frame, short corridor, smaller reading area; deeper frame, wider zones.
Occupational and office lenses
An occupational lens, often sold as an office or computer lens, is a progressive turned upside down in priority. It is built from the reading power upwards and only partly reduces power towards the top, so it covers near and intermediate distances with wide, comfortable zones and gives up true distance vision. Designs are offered in room depths, such as 1.3 m, 2 m or 4 m, matched to how far you need to see from your desk.
They are superb for people who spend the day between a screen, a keyboard and a colleague across the desk, and for anyone who finds the intermediate zone of their everyday progressive too narrow for work. They are not for driving, and most wearers keep them as a second pair.
Digital surfacing and freeform design
Older progressives had the design moulded into the front surface. Freeform lenses are cut point by point by computer-controlled machinery, usually on the back surface, so the design can be calculated for your exact prescription, frame shape and fitting measurements. The gains are wider usable zones and less peripheral blur, especially for high or astigmatic prescriptions. The physics is unchanged, so a freeform lens is a better compromise, not a lens without compromise.
Which design suits which wearer
| Design | Zones | Visible line | Adaptation | Best for | Limits |
|---|---|---|---|---|---|
| Single vision | One | No | Minimal | Under-40s; dedicated reading or driving pairs | Only one working distance |
| Bifocal | Two | Yes | Short | Wide reading area, lower cost, progressive non-adapters | No intermediate zone; image jump |
| Progressive | Continuous | No | Days to two weeks | One pair for everything | Peripheral blur; needs precise fitting and enough frame depth |
| Occupational | Near to intermediate | No | Short | Desk and screen work | Not for distance; usually a second pair |
What to tell the optician
The design that suits you depends on how you actually use your eyes, so it pays to go to the eye test with some answers ready.
- Your real working distances: screen height and distance, how far you hold a phone, whether you read music or dashboards.
- Any previous progressive that did not work, and what felt wrong: narrow reading, swim when walking, blur at the sides.
- The frame you want, so the corridor length can be chosen to fit it rather than the other way round.
- Whether you want one all-purpose pair or two specialised pairs; two single-purpose lenses often beat one compromise.
The reading addition and working distances should be measured, not guessed. If you are in Abu Dhabi, you can book a free eye test at Optic One on Hamdan Street before choosing a design; wherever you go, make sure an optometrist checks the prescription first.
Rule of thumb: if a progressive still feels wrong after two weeks of full-time wear, have the fitting measurements re-checked before changing the design. Most complaints trace back to position, not the lens.
Once the design is settled, the next choices are the coating and, for outdoor wear, the tint. Our guide to lens coatings and the comparison of photochromic and polarised lenses cover those.

